Installation Instructions For: 2017 - 2026 MB Boats Bimini Extension Kit (Fits MB’s solid “non-tubular” wakeboard tower using existing 3/8" fasteners) This kit is designed specifically for MB Boats equipped with the flat, solid-plate tower. Installation is quick because it uses the factory 3/8 inch bolts already threaded into the tower — no drilling, cutting, or modifications. Once installed, the carbon-fiber telescoping poles deploy in about 60 seconds  and give your boat a

Mounting Instructions For: Pontoon Boat Bimini Extension Kit This kit mounts directly through the deck of your pontoon and gives you a stable, forward or rear pull shade system that works with almost any factory Bimini. The install is straightforward as long as you measure carefully and check for obstructions before drilling. What You’ll Need Drill 1 5/8 inch hole saw 5 mm drill bit Marker or pencil Tape measure Adjustable Wrench for M39 Nut The two Shoreline deck-mount brack

Installation Instructions for: Centurion Predator Tower Kit This extension kit is designed specifically for Centurion boats running the Predator Tower Bimini. It mounts directly to the 1.5 inch Bimini frame tubing and adds a clean, stable shade system that extends toward the stern. The install is quick and doesn’t require any drilling or modification to your tower. What’s Included You’ll find everything you need in the box: (2) 1.5 inch Clamp Brackets and hardware (2) telesco

Installation Instructions For: Nautique Telescoping Tower Bimini Extension This extension kit is designed specifically for Nautique boats running the telescoping tower Bimini. It mounts directly to the 1.5 inch Bimini frame tubing and adds a clean, stable shade system that extends toward the stern. The install is quick and doesn’t require any drilling or modification to your tower or bimini. What’s Included You’ll find everything you need in the box: (2) 1.5 inch diameter bra

Installation Instructions For 2019–2026 Nautique Standard Towers This setup is designed to bolt directly to the factory speaker mounts on top of the Nautique Standard tower. Once installed gives the whole crew a ton more coverage. The process is simple, but it does involve removing the factory speaker bolts, so take your time and follow the steps below. Watch this video for a quick demonstration of the installation process https://www.youtube.com/shorts/ueI8wsm5M90 What’s Inc

Installation Instructions For; Malibu Bimini Extension Kit Tige Bimini Extension Kit Centurion and Supreme Bimini Extension Kit Before you start, lay everything out. You should see: (2) Black Bimini clamps (2) Telescoping carbon fiber support poles (1) Shade Canvas (1) Storage Bag This kit can be assembled without any tools required. Step 1: Mount the Clamps to Your Bimini Frame Start by disassembling the black Shoreline clamps. They come pre-assembled, so you’ll need to sepa

Installation Instructions For: Universal Wake Tower Bimini Extension Kit A simple, step-by-step guide for boat owners If you’ve picked up the Shoreline Brands Universal Bimini Extension Kit, you’re about to unlock way more shade and way happier crew days. The install is straightforward, and most people can knock it out in under 20 minutes with basic tools. This guide walks you through each step so you can get everything mounted, aligned and ready for the water. Visit this lin